Tub-to-Shower Conversions in Draper, UT (84020) — Waterproof Tile Showers
In Draper, UT (84020), a code-permitted porcelain tile tub-to-shower conversion by Urban Design & Remodel (Grant Helmer, Utah DOPL License #10146123-5501, (801) 440-1952) typically costs $8,900 to $16,500 and takes 5 to 8 working days. Unlike hollow glue-up acrylic wall liners, every conversion includes full demolition to studs, upsizing the 1.5-inch tub drain to a 2-inch Utah IPC shower trap, 24-hour flood-tested Schluter-KERDI waterproofing, non-slip porcelain tile, and 3/8-inch EnduroShield glass.
Homeowners throughout SunCrest, South Mountain, Corner Canyon, Bellevue, and Steep Mountain in Draper, UT (84020) are replacing high-sided fiberglass and cast-iron alcoves in 1996–2023 SunCrest ridge homes, South Mountain estates & Corner Canyon customs with spacious, low-threshold or curbless porcelain walk-in showers. High-pressure national franchises charge $13,000–$18,000 to glue thin 1/8-inch PVC or acrylic panels over uninspected framing. Urban Design & Remodel builds permanent, stud-up waterproofed tile showers tailored for 12–17 GPG WaterPro & Jordan Valley supply at transparent local general-contractor pricing.
Real Schluter-KERDI Porcelain Tile vs. Hollow 1-Day Acrylic Liners in Draper
Gluing plastic sheets over old drywall traps moisture and flexes underfoot within a few winters. In Draper, we strip the 60x30 or 60x32 tub alcove down to bare framing, inspect subfloor OSB around the old overflow shoe for hidden rot, sister out-of-plumb studs laser-flat, and install continuous sheet-applied Schluter-KERDI waterproofing membrane overKERDI-BOARD walls before setting rectified porcelain tile.
- 24-hour plugged water flood test on every Draper shower pan prior to tile setting
- Solid 2x10 kiln-dried wood blocking at 33"–36" AFF for 250-lb ADA grab bar support
- Stain-proof polymer or epoxy grout engineered to resist 12–17 GPG WaterPro & Jordan Valley supply
Utah IPC 2-Inch Drain Upsizing & Thermostatic Anti-Scald Valve Upgrades
Bathtubs in 1996–2023 SunCrest ridge homes, South Mountain estates & Corner Canyon customs drain through 1.5-inch piping, whereas Utah International Plumbing Code (IPC Section 417) requires a full 2-inch P-trap and branch drain for walk-in showers so high-flow rain and handheld heads never pool at your feet. While walls are open, we also replace dated single-stem valves with ASSE 1016 pressure-balanced or thermostatic mixing valves plus a dual slide-bar handheld wand.
- Code-compliant 1.5" to 2" PVC/ABS shower P-trap conversion in wood or concrete slabs
- Recessed waterproof tiled shampoo niches and corner or full-width tiled benches
- Optional zero-threshold curbless entry for effortless aging-in-place in Draper
3/8-Inch Frameless Glass Treated for Draper Hard Culinary Water
Because Draper homes receive 12–17 GPG WaterPro & Jordan Valley supply, untreated clear shower doors etch with white calcium scale unless protected. We laser-measure custom 3/8-inch heavy tempered frameless bypass or pivot enclosures after tile completion and factory-apply hydrophobic EnduroShield glass coating that cuts mineral spotting by up to 90%.
- Custom-measured 3/8" heavy tempered glass in matte black, brushed nickel, or warm brass
- ANSI A326.3 wet DCOF >= 0.42 slip-resistant shower pan mosaic or linear-drain slab tile
- Quiet Panasonic WhisperCeiling humidity-sensing exhaust fan upgrades vented outdoors
Clean 5-to-8-Day Draper Execution & Draper City Building Division Code Compliance
Led personally by Owner Grant Helmer (Utah DOPL #10146123-5501), our Draper crew protects hallways with Ram Board floor runners and zippered HEPA dust barriers. We coordinate any required Draper City Building Division plumbing inspections and leave your new walk-in shower spotless and ready for daily use in roughly one week.
- Itemized fixed-price Draper contract with zero surprise change orders
- Full tub haul-away, daily vacuum cleanup, and single-contractor accountability
- Backed by Utah DOPL General Contractor License #10146123-5501 in West Jordan
2026 Draper, UT (84020) Tub-to-Shower Conversion Cost Comparison
| Conversion Option | Draper Installed Price | Waterproofing & Drain Spec | Expected Lifespan |
|---|---|---|---|
| Custom Porcelain Alcove Conversion | $8,900 – $12,800 | 2" IPC trap, KERDI flood test, niche, 3/8" glass | 30+ Years |
| ADA Curbless Roll-In Conversion | $11,800 – $16,900 | Recessed joist pan, linear drain, blocked grab bars, bench | 30+ Years |
| Oversized Soaker Tub to Spa Shower | $13,500 – $21,000 | Dual rain/handheld heads, heated bench, frameless enclosure | 30+ Years |
| Franchise 1-Day Glue-Up Plastic Liner | $12,500 – $18,000 (Competitors) | Caulked acrylic over old walls, often 1.5" drain | 7 – 12 Years |
Grant Helmer's Utah Field Pro-Tip (DOPL #10146123-5501)
On slab-on-grade basements and main floors in Draper (84020), chipping a 14x14 plumbing box in the concrete slab lets us upgrade the old 1.5-inch tub P-trap to a true centered 2-inch shower drain in half a day—never settle for a slow-draining adapter bushing.
Frequently Asked Questions: Tub To Shower Conversion Draper Ut
Does removing the only bathtub in a Draper home hurt resale value?
As long as at least one secondary hall or basement bathroom in your Draper home retains a bathtub for families with young children, converting an unused primary or guest tub into a custom porcelain walk-in shower increases buyer appeal and appraisal value across SunCrest, South Mountain, Corner Canyon, Bellevue, and Steep Mountain.
How long does a tile tub-to-shower conversion take in Draper, UT?
A complete gut-to-studs porcelain tile tub-to-shower conversion in Draper takes 5 to 8 working days—covering tub demolition, 2-inch drain plumbing, Schluter-KERDI waterproofing, 24-hour flood testing, tile setting, grouting, and custom tempered glass installation.
Do I need a Draper plumbing permit to convert a tub into a walk-in shower?
Whenever trap sizing, drain location, or shower mixing valve rough-ins are modified, Draper City Building Division plumbing code standards apply. Urban Design & Remodel handles required permitting and ensures full Utah IPC compliance.
Can you add grab bars and a built-in tiled bench without making the shower look clinical?
Yes. We install solid 2x10 structural blocking behind the tile and mount designer stainless grab bars in matching matte black, brushed nickel, or champagne bronze alongside a quartz-topped floating corner bench.
Related Utah Roofing, Bathroom & Remodeling Resources
Schedule Your Draper, UT Inspection or Design Quote
Direct owner consultation with Grant Helmer (Utah DOPL #10146123-5501) — zero high-pressure sales.