Tub-to-Shower Conversions in Murray, UT (84107 & 84123) — Waterproof Tile Showers
In Murray, UT (84107 & 84123), a code-permitted porcelain tile tub-to-shower conversion by Urban Design & Remodel (Grant Helmer, Utah DOPL License #10146123-5501, (801) 440-1952) typically costs $8,900 to $16,500 and takes 5 to 8 working days. Unlike hollow glue-up acrylic wall liners, every conversion includes full demolition to studs, upsizing the 1.5-inch tub drain to a 2-inch Utah IPC shower trap, 24-hour flood-tested Schluter-KERDI waterproofing, non-slip porcelain tile, and 3/8-inch EnduroShield glass.
Homeowners throughout Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street in Murray, UT (84107 & 84123) are replacing high-sided fiberglass and cast-iron alcoves in 1950–1988 mid-century brick bungalows, Wheeler Farm ramblers & cast-iron drain homes with spacious, low-threshold or curbless porcelain walk-in showers. High-pressure national franchises charge $13,000–$18,000 to glue thin 1/8-inch PVC or acrylic panels over uninspected framing. Urban Design & Remodel builds permanent, stud-up waterproofed tile showers tailored for 12–16 GPG Murray City municipal artesian well water at transparent local general-contractor pricing.
Real Schluter-KERDI Porcelain Tile vs. Hollow 1-Day Acrylic Liners in Murray
Gluing plastic sheets over old drywall traps moisture and flexes underfoot within a few winters. In Murray, we strip the 60x30 or 60x32 tub alcove down to bare framing, inspect subfloor OSB around the old overflow shoe for hidden rot, sister out-of-plumb studs laser-flat, and install continuous sheet-applied Schluter-KERDI waterproofing membrane overKERDI-BOARD walls before setting rectified porcelain tile.
- 24-hour plugged water flood test on every Murray shower pan prior to tile setting
- Solid 2x10 kiln-dried wood blocking at 33"–36" AFF for 250-lb ADA grab bar support
- Stain-proof polymer or epoxy grout engineered to resist 12–16 GPG Murray City municipal artesian well water
Utah IPC 2-Inch Drain Upsizing & Thermostatic Anti-Scald Valve Upgrades
Bathtubs in 1950–1988 mid-century brick bungalows, Wheeler Farm ramblers & cast-iron drain homes drain through 1.5-inch piping, whereas Utah International Plumbing Code (IPC Section 417) requires a full 2-inch P-trap and branch drain for walk-in showers so high-flow rain and handheld heads never pool at your feet. While walls are open, we also replace dated single-stem valves with ASSE 1016 pressure-balanced or thermostatic mixing valves plus a dual slide-bar handheld wand.
- Code-compliant 1.5" to 2" PVC/ABS shower P-trap conversion in wood or concrete slabs
- Recessed waterproof tiled shampoo niches and corner or full-width tiled benches
- Optional zero-threshold curbless entry for effortless aging-in-place in Murray
3/8-Inch Frameless Glass Treated for Murray Hard Culinary Water
Because Murray homes receive 12–16 GPG Murray City municipal artesian well water, untreated clear shower doors etch with white calcium scale unless protected. We laser-measure custom 3/8-inch heavy tempered frameless bypass or pivot enclosures after tile completion and factory-apply hydrophobic EnduroShield glass coating that cuts mineral spotting by up to 90%.
- Custom-measured 3/8" heavy tempered glass in matte black, brushed nickel, or warm brass
- ANSI A326.3 wet DCOF >= 0.42 slip-resistant shower pan mosaic or linear-drain slab tile
- Quiet Panasonic WhisperCeiling humidity-sensing exhaust fan upgrades vented outdoors
Clean 5-to-8-Day Murray Execution & Murray City Building Division Code Compliance
Led personally by Owner Grant Helmer (Utah DOPL #10146123-5501), our Murray crew protects hallways with Ram Board floor runners and zippered HEPA dust barriers. We coordinate any required Murray City Building Division plumbing inspections and leave your new walk-in shower spotless and ready for daily use in roughly one week.
- Itemized fixed-price Murray contract with zero surprise change orders
- Full tub haul-away, daily vacuum cleanup, and single-contractor accountability
- Backed by Utah DOPL General Contractor License #10146123-5501 in West Jordan
2026 Murray, UT (84107 & 84123) Tub-to-Shower Conversion Cost Comparison
| Conversion Option | Murray Installed Price | Waterproofing & Drain Spec | Expected Lifespan |
|---|---|---|---|
| Custom Porcelain Alcove Conversion | $8,900 – $12,800 | 2" IPC trap, KERDI flood test, niche, 3/8" glass | 30+ Years |
| ADA Curbless Roll-In Conversion | $11,800 – $16,900 | Recessed joist pan, linear drain, blocked grab bars, bench | 30+ Years |
| Oversized Soaker Tub to Spa Shower | $13,500 – $21,000 | Dual rain/handheld heads, heated bench, frameless enclosure | 30+ Years |
| Franchise 1-Day Glue-Up Plastic Liner | $12,500 – $18,000 (Competitors) | Caulked acrylic over old walls, often 1.5" drain | 7 – 12 Years |
Grant Helmer's Utah Field Pro-Tip (DOPL #10146123-5501)
On slab-on-grade basements and main floors in Murray (84107 & 84123), chipping a 14x14 plumbing box in the concrete slab lets us upgrade the old 1.5-inch tub P-trap to a true centered 2-inch shower drain in half a day—never settle for a slow-draining adapter bushing.
Frequently Asked Questions: Tub To Shower Conversion Murray Ut
Does removing the only bathtub in a Murray home hurt resale value?
As long as at least one secondary hall or basement bathroom in your Murray home retains a bathtub for families with young children, converting an unused primary or guest tub into a custom porcelain walk-in shower increases buyer appeal and appraisal value across Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street.
How long does a tile tub-to-shower conversion take in Murray, UT?
A complete gut-to-studs porcelain tile tub-to-shower conversion in Murray takes 5 to 8 working days—covering tub demolition, 2-inch drain plumbing, Schluter-KERDI waterproofing, 24-hour flood testing, tile setting, grouting, and custom tempered glass installation.
Do I need a Murray plumbing permit to convert a tub into a walk-in shower?
Whenever trap sizing, drain location, or shower mixing valve rough-ins are modified, Murray City Building Division plumbing code standards apply. Urban Design & Remodel handles required permitting and ensures full Utah IPC compliance.
Can you add grab bars and a built-in tiled bench without making the shower look clinical?
Yes. We install solid 2x10 structural blocking behind the tile and mount designer stainless grab bars in matching matte black, brushed nickel, or champagne bronze alongside a quartz-topped floating corner bench.
Related Utah Roofing, Bathroom & Remodeling Resources
Schedule Your Murray, UT Inspection or Design Quote
Direct owner consultation with Grant Helmer (Utah DOPL #10146123-5501) — zero high-pressure sales.