Licensed Roofing Contractor & Roof Replacement in Murray, UT (84107 & 84123)

Direct Answer: Who is a licensed residential roofing contractor serving Murray, UT (84107 & 84123) for roof replacement, wind repair, and ice-dam waterproofing?

Urban Design & Remodel, led by Owner and Licensed Utah General Contractor Grant Helmer (DOPL License #10146123-5501, (801) 440-1952), provides code-inspected residential roof replacements, storm and wind repairs, and IRC R905.1.2 ice-dam waterproofing across Murray, UT (84107 & 84123), including Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street. Typical Murray architectural and Class 4 shingle tear-offs range from $11,800 to $24,900 with 1-to-2-day completion.

Licensed Roofing Contractor & Roof Replacement in Murray, UT (84107 & 84123) — Urban Design & Remodel (Murray, UT)

Roofs in Murray, UT (84107 & 84123) sit at 4,300–4,420 ft and must withstand both 30 psf valley snow load and Central valley winter inversions & spring cold-front squalls. Across Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street, aging 3-tab and builder-grade laminate roofs on 1950–1988 mid-century brick bungalows, Wheeler Farm ramblers & cast-iron drain homes frequently develop lifted starter courses, brittle plumbing vent boots, and eave ice-dam seepage. As a licensed Utah General Contractor (DOPL #10146123-5501), Urban Design & Remodel engineers complete full-tear-off roof assemblies—and repairs any interior ceiling drywall damage—under one accountable local warranty.

Full-Tear-Off Architectural & Class 4 Shingle Systems for Murray (84107 & 84123)

Rather than laying a second layer of shingles over heat-curled asphalt, our crew strips your Murray roof down to bare OSB or plank sheathing, replaces any delaminated sheets around valleys and stacks, and re-nails loose deck panels per Murray City Building Division structural requirements. We install woven synthetic underlayment, pre-painted 26-gauge Type-D steel drip edge, factory-sealed starter strips, and Class H (130 mph) or UL 2218 Class 4 SBS-modified shingles engineered for Central valley winter inversions & spring cold-front squalls.

  • 6-nail high-wind fastening pattern rated up to 130 mph for Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street
  • UL 2218 Class 4 impact-rated Owens Corning Duration Storm & Malarkey Vista options
  • Daily Catch-All landscape tarping and rolling rare-earth magnetic nail sweeps

Murray Snow-Load Engineering, 6-Foot Ice Barrier & Balanced Attic Airflow

At 4,300–4,420 ft (30 psf valley snow load), meltwater refreezing over cold eaves is the leading cause of winter soffit and drywall staining in Murray. In full compliance with Utah IRC Section R905.1.2, we install self-adhering high-temperature polymer-modified ice-and-water membrane extending at least 24 inches inside the warm exterior wall line—typically two full 36-inch courses (6 feet) up from the eave—plus full 36-inch valley and skylight perimeters. We balance aluminum soffit intake with baffled external-deflector ridge exhaust so your attic stays cold in January and 25°F cooler in July.

  • Minimum 72-inch eave ice-and-water shield across deep overhangs in 84107 & 84123
  • 24-gauge W-profile open metal valleys that shed heavy wet Wasatch spring slush
  • Insulated steel roof jacks for bathroom exhaust fans previously dumped into attics
Murray Snow-Load Engineering, 6-Foot Ice Barrier & Balanced Attic Airflow — Urban Design & Remodel Utah

Flashing Retrofits, Stucco Kickouts & Canyon-Wind Leak Diagnostics in Murray

Over 85% of active leaks we inspect around Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street originate at flashing transitions rather than field shingles—including cracked black neoprene pipe boots, un-cricketed wide chimneys, and missing roof-to-stucco kickout diverters. Grant Helmer performs forensic attic and rooftop diagnostics to isolate entry paths, installing 26-gauge galvanized step and counter-reglet flashings, IRC R1003.20 snow-diverting chimney crickets, and UV-proof silicone pipe flashings.

  • Kickout diverter flashings preventing hidden OSB rot behind Murray stucco walls
  • Swamp-cooler decommissioning, structural 7/16" OSB deck patching, and shingle weaving
  • Clear collateral hail and wind photo documentation when storm claims are warranted

Turnkey Roof + Interior Ceiling Restoration Under One Utah General Contractor

Roofing-only sub-crews walk away once shingles are nailed down, leaving Murray homeowners with water-stained vaulted ceilings and wet attic insulation. Because Grant Helmer holds Utah DOPL General Contractor License #10146123-5501, Urban Design & Remodel coordinates your Murray City Building Division reroof permit AND restores damaged interior insulation, 5/8-inch drywall, orange-peel or knockdown texture, and ceiling paint seamlessly.

  • Complete Murray City Building Division reroof permitting, ice-barrier photo logs, and final sign-off
  • Optional interior leak drywall, R-49 attic insulation top-off, and paint restoration
  • Direct owner supervision by Grant Helmer with a 10-year workmanship guarantee

2026 Murray, UT (84107 & 84123) Roofing Replacement & Repair Cost Guide

Murray Roofing ScopeInstalled RangeMurray Engineering SpecTimeline
Architectural Shingle Tear-Off (Murray)$11,800 – $21,500130-mph 6-nail Class H, 6-ft ice barrier, ridge vent1 – 2 Days
Class 4 SBS Hail & Wind System (84107 & 84123)$14,200 – $25,800UL 2218 Class 4 rubberized asphalt, open W-valleys1 – 2 Days
Standing Seam Metal / Accent Roofs$18,500 – $44,000+24-ga PVDF Kynar-500 concealed clip + snow guards3 – 5 Days
Wind, Flashing & Pipe-Boot Repair$650 – $2,950Silicone pipe collars, step flashing, chimney cricketSame-Day – 1 Day

Grant Helmer's Utah Field Pro-Tip (DOPL #10146123-5501)

In Murray (84107 & 84123), never accept a reroof bid that reuses old aluminum turtle vents alongside a new ridge vent—mixing static box vents and ridge vents short-circuits upper-attic airflow and pulls blowing snow into the attic during central valley winter inversions & spring cold-front squalls.

Frequently Asked Questions: Roofing Contractor Murray Ut

Does Murray, UT require a building permit for a roof tear-off and replacement?

Yes. Murray City Building Division requires residential reroofing compliance whenever existing roofing layers are removed or structural decking is replaced, including verification of IRC R905.1.2 ice-barrier coverage for 30 psf valley snow load. Urban Design & Remodel handles permitting and inspection scheduling for your Murray property.

Which shingles hold up best against Murray wind gusts and winter freeze-thaw cycles?

For Wheeler Park, Murray Parkway, Woodstock, Fashion Place East, and Vine Street, we recommend heavy laminated Class H architectural shingles with reinforced fabric nailing zones (Owens Corning Duration) or SBS polymer-modified Class 4 shingles (Malarkey Vista) fastened with a 6-nail pattern to handle Central valley winter inversions & spring cold-front squalls.

How fast can Urban Design & Remodel replace a residential roof in Murray?

Most single-family asphalt shingle tear-offs in Murray (84107 & 84123) are completed in 1 to 2 working days, including full tear-off, OSB deck inspection, 6-foot ice-and-water shield, synthetic underlayment, ridge ventilation, and magnetic nail cleanup.

Can you repair interior ceiling water stains in Murray at the same time as our roof leak?

Yes. As a licensed Utah General Contractor (DOPL #10146123-5501), Grant Helmer's team stops the exterior flashing or valley leak first and then replaces wet attic insulation, patches drywall, matches texture, and repaints your interior ceiling under one contract.

Related Utah Roofing, Bathroom & Remodeling Resources

Core Commercial Service Residential Roofing & Storm Protection Explore Guide → Local Utah Hub West Jordan & Salt Lake Roofing Explore Guide → Technical Utah Guide Steep-Slope & Bench Roofing Contractor in Salt Lake City, UT Explore Guide → Technical Utah Guide Licensed Roofing Contractor & Roof Replacement in Kaysville, UT (84037) Explore Guide → Technical Utah Guide Owens Corning Duration vs GAF Timberline HDZ: Which Survives Utah Best? Explore Guide → Technical Utah Guide Ridge Vent vs Box Vents in Utah: Stopping Winter Attic Frost & OSB Rot Explore Guide →
Grant Helmer — Urban Design & Remodel

About the Contractor: Grant Helmer

Grant Helmer is the Owner and Licensed General Contractor (Utah DOPL License #10146123-5501) at Urban Design & Remodel in West Jordan, UT. From architectural shingle & storm-ready residential roofing to custom waterproof tile showers, ADA barrier-free bathrooms, custom kitchens, and permitted basement finishing, Grant personally oversees code compliance and craftsmanship on every project. Read Contractor Bio →

Free Itemized In-Home Estimate

Schedule Your Murray, UT Inspection or Design Quote

Direct owner consultation with Grant Helmer (Utah DOPL #10146123-5501) — zero high-pressure sales.

Call (801) 440-1952